McLeod Industries Home
Home
BELLHOUSINGS & ACCESSORIES
APPLICATION GUIDE INDEX:
 GENERAL MOTORS – MEETS SFI 6-1 SPEC'S
PART NO. YEAR APPLICATION
8630 1955-81 CHEVROLET V-8 (EXCEPT CHEVY II & NOVA) W/O EXTERNAL SLAVE CYL BRACKET & SOME V6
[1] INCLUDED IS REGISTER RING TO GO FROM 4.850" FORD TO 4.680" CHEVROLET
     TRANS. PATTERNS  =  SAGINAW, MUNCIE, T10, T50, & NARROW PATTERN FORD, TREMEC TCET2057
6.295" DEEP WITHOUT MOTOR PLATE .187" MOTOR PLATE
     REPLACES LAKEWOOD NUMBERS: 15000,15003,15060
8650 1962-92 CHEVROLET V8 (EXCEPT CHEVY II & NOVA) & SOME V6 ENGINES.   NO HYD. SLAVE CYL  BRACKET
1967-80 BUICK V8 & SOME V6 ENG.   NO HYD SLAVE CYL BRACKET
1964-92 OLDS & PONTIAC V8 (EXCEPT 215) & SOME V6 ENG.   NO HYD SLAVE CYL BRACKET
6.295" DEEP WITHOUT MOTOR PLATE .187" MOTOR PLATE
     TRANS. PATTERNS  =  SAGINAW, MUNCIE, T10, T50, T5  W/17 DEGREE PATTERN, TREMEC TCET2057
     REPLACES LAKEWOOD NUMBERS: 15000, 15010, 15015,15020, 15100, 15120
     
 FORD MOTOR CO – MEETS SFI 6-1 SPEC'S
PART NO. YEAR APPLICATION
8624 1965-78 289,302,351 ENG. W/3 & 4 SPD TRANS.   6 BOLT BLOCK, USES MECHANICAL OR CABLE LINKAGE.  
  CAN USE 157 OR 164 TOOTH FLYWHEELS.
     TRANS. PATTERNS  =   NARROW SPREAD &  WIDE SPREAD FORD PATTERN TREMEC 3550 SHORT SHAFT
6.125" DEEP WITHOUT MOTOR PLATE .187" MOTOR PLATE
     REPLACES LAKEWOOD NUMBERS: 15200, 15201
8629 SAME AS 8624 WITH HYD SLAVE CYL. BRACKET WELDED ON
6.125" DEEP WITHOUT MOTOR PLATE .187" MOTOR PLATE
8660 1979-93 289,302,351 ENG.   FITS ALL SB FOR EITHER T5 OR TREMEC LONG SHAFT TRANS.    
    TWO REGISTER RINGS ARE INCLUDED  (1) @ 4.850" FOR TREMEC, AND (1) @ 4.910" FOR T5
    TRANS. PATTERNS  =  T5, TREMEC 3550 & TKO LONG SHAFT
6.733" DEEP WITHOUT MOTOR PLATE .187" MOTOR PLATE
     REPLACES LAKEWOOD NUMBERS: 15202, 15203
8665 1994-95 5.0L 302 ENG. SAME AS 8660 WITH 8609 ADAPTER INCLUDED TO FIT 1994-95 T5 LONG SHAFT TRANS.
7.483" DEEP WITHOUT MOTOR PLATE, WITH ADAPTER PLATE .187" MOTOR PLATE
 

ALL MOTOR PLATES COME WITH STARTER KNOCKOUT FOR LARGER OR SMALLER RING GEARS ON FLYWHEELS.
EACH KNOCKOUT IS TACK WELDED TO HOLD IT IN PLACE.
ALL MOTOR PLATES ARE .187" THICK
     
 

ALL ADAPTERS HERE ARE 3/4" THICK

  
8607 TREMEC
TRANS ADAPTER
4.850" MALE
4.850" FEMALE		 8608 T5 FORD                   
TRANS ADAPTER     
4.850" MALE      
4.910" FEMALE		 8607B BLANK ADAPTER
TRANS. ADAPTER
4.850" MALE 
4.850" FEMALE		 8609 T5 FORD ADAPTER FOR
1993 & DN STOCK BELLHSG.
TO MAKE INTO 94 & 95 DEPTH 
4.910" MALE  
4.910" FEMALE		 8610 ADAPTER 
TREMEC 3550 & 3550TKO
TO 17 DEGREE ROTATED
GM T5 TRANS. PATTERN
4.680" MALE
4.850" FEMALE
[1] MODIFICATIONS ARE UNDERWAY TO MAKE 8630 FIT LS1 ENG ALSO
 
BELLHOUSING ASSEMBLIES BREAKDOWN
  GENERAL MOTORS  
  ASSEMBLY REPLACEMENT PARTS FOR BELLHOUSING ASSEMBLY  
  PART HOUSING MOTOR BOLT ADAPTER REGISTER REGISTER  
  NUMBER ONLY PLATE KIT IF NEEDED RING RING  
  8630 8633 8631 8600     8613  
  8650 8653 8651 8600        
               
  8655 8653 8651 8600 8610      
 
   
  8630 8650 8655  
 
MEETS SFI 6-1 SPEC'S
  FORD MOTOR CO  
  ASSEMBLY REPLACEMENT PARTS FOR BELLHOUSING ASSEMBLY  
  PART HOUSING MOTOR BOLT ADAPTER REGISTER REGISTER  
  NUMBER ONLY PLATE KIT IF NEEDED 4.910 RING 4.850 RING  
  8624 8623 8621 8600        
               
  8625 8623 8621 8600 8607      
               
  8629 8623-5 8621 8600        
               
  8660 8663 8621 8600   8611 8612  
               
  8665 8663 8621 8600 8609   8612  
 
8624 8625 8629 8660 8665
Back to Top