McLeod Industries Home
Home
HYDRAULIC THROWOUT BEARING - SLIP ON
GO TO: HYDRAULIC THROWOUT BEARING - BOLT ON
APPLICATION GUIDE INDEX:

SLIP ON ASSEMBLY WITH ADJUSTING SCREW
2ND GENERATION WITH ELBO SWIVELS
USE BOLT ON BEARING WHEN BELLHOUSING IS 6.500" OR LESS OR IF "A" DIMENSION IS LESS THAN 3"
 APPLICATION SPLINE STOCK
T.O. BRG
I. D.		 BRG. ASSY
W/O [1]
MAST. CYL		 BRG. ASSY
WITH [1]
MAST. CYL		 LINE
LAUNCH
ASSY		 SPACER
SLEEVE
[2]
GENERAL MOTORS
MUNCIE, SAGINAW, T-10  3 & 4 SPEEDS 1-1/8X10 & 1-1/8X26 USE BOLT ON FOR BELLHOUSINGS 6.500" OR LESS
BORG WARNER T-5, T-50    5 SPEED 1X14 & 1-1/8X26 USE BOLT ON FOR BELLHOUSINGS 6.500" OR LESS
BORG WARNER T-56 CAMARO/FIREBIRD 6 SPEED 1-1/8X26 USE BOLT ON FOR BELLHOUSINGS 6.500" OR LESS
BORG WARNER T-56 AFTER MARKET 6 SPEED 1-1/8X26 USE BOLT ON FOR BELLHOUSINGS 6.500" OR LESS
TRUCK - 4 SPEED W/COMPOUND LOW 1-1/8X10 USE BOLT ON FOR BELLHOUSINGS 6.500" OR LESS
TRUCK - 5 SPEED HM290 GETRAG W/O.D. 1-1/8X10 USE BOLT ON FOR BELLHOUSINGS 6.500" OR LESS
TREMEC    5 SPEED  - TKO 1-1/8X26 USE BOLT ON FOR BELLHOUSINGS 6.500" OR LESS
RICHMOUND    5 & 6 SPEED  1-1/8X26 USE BOLT ON FOR BELLHOUSINGS 6.500" OR LESS
G-FORCE     5 & 6 SPEED 1-1/8X26 USE BOLT ON FOR BELLHOUSINGS 6.500" OR LESS
LIBERTY    5 & 6 SPEED 1-3/16X18 USE BOLT ON FOR BELLHOUSINGS 6.500" OR LESS
JERICO    5 & 6 SPEED ALL 1-1/8X26 & 1-3/16X18 USE BOLT ON FOR BELLHOUSINGS 6.500" OR LESS
JERICO    5 & 6 SPEED WITH 3.347" FRT BRG 1-3/8X10                             [3] USE BOLT ON FOR BELLHOUSINGS 6.500" OR LESS
JERICO    2, 3, & 4 SPEED ALL 1-1/8X26 & 1-3/16X18 USE BOLT ON FOR BELLHOUSINGS 6.500" OR LESS
JERICO    2, 3, & 4 SPEEDS WITH 3.542 FRT BRG 1-3/8X10                             [4] USE BOLT ON FOR BELLHOUSINGS 6.500" OR LESS
FORD MOTOR CO.
3 & 4 SPEED, FORD & TOP LOADER 1-1/16X10 USE BOLT ON FOR BELLHOUSINGS 6.500" OR LESS
4 SPEED TOP LOADER 1-3/8X10                             [3] USE BOLT ON FOR BELLHOUSINGS 6.500" OR LESS
4 SPEED    6.9L DIESEL ENG. 1-1/16X10 USE BOLT ON FOR BELLHOUSINGS 6.500" OR LESS
BORG WARNER T-5 THRU 1993 1-1/16X10 1.430 1400-30 14005-30 140051-30 1439
BORG WARNER T-5 1994-95 1-1/16X10 1.430 1400-30 14005-30 140051-30 1439 [5]
BORG WARNER T-45 1996 & UP 1-1/16X10 1.430 1400-30 14005-30 140051-30 1439 [5]
BORG WARNER T-56 AFTER MARKET 6 SPEED 1-1/8X26 1.430 1400-30 14005-30 140051-30 [8]
PINTO & ROCKET BOX 1-1/16X10 USE BOLT ON FOR BELLHOUSINGS 6.500" OR LESS
TREMEC 5 SPEED TKO 500/600, 3550 & 3550TKO 1-1/16X10 1.430 1400-30 14005-30 140051-30 1439
RICHMOUND    5 & 6 SPEED  1-1/8X26 USE BOLT ON FOR BELLHOUSINGS 6.500" OR LESS
G-FORCE     5 & 6 SPEED 1-1/8X26 USE BOLT ON FOR BELLHOUSINGS 6.500" OR LESS
LIBERTY    5 & 6 SPEED 1-3/16X18 USE BOLT ON FOR BELLHOUSINGS 6.500" OR LESS
JERICO    5 & 6 SPEED ALL 1-1/8X26 & 1-3/16X18 USE BOLT ON FOR BELLHOUSINGS 6.500" OR LESS
JERICO    5 & 6 SPEED WITH 3.347" FRT BRG 1-3/8X10                             [3] 1.750 1400-74 14005-74 140051-74
JERICO    5 & 6 SPEED ALL 1-1/8X26 & 1-3/16X18 USE BOLT ON FOR BELLHOUSINGS 6.500" OR LESS
JERICO    5 & 6 SPEED WITH 3.542 FRT BRG 1-3/8X10                             [4] 1.750 1400-75 14005-75 140051-75
CHRYSLER MOTORS
A833   4 SPEED 1X23 1.250 1400-10 14005-10 140051-10 1419
440 & 426" ENG.   4 SPEED 1-3/16X18 1.410 1400-30 14005-30 140051-30 1439
RICHMOUND    5 & 6 SPEED  1-1/8X26 1.410 1400-30 14005-30 140051-30 1439
G-FORCE     5 & 6 SPEED 1-1/8X26 1.410 1400-30 14005-30 140051-30 1439
LIBERTY    5 & 6 SPEED 1-3/16X18 1.410 1400-30 14005-30 140051-30 1439
JERICO    5 & 6 SPEED ALL 1-1/8X26 & 1-3/16X18 1.410 1400-30 14005-30 140051-30 1439
JERICO    5 & 6 SPEED WITH 3.347" FRT BRG 1-3/8X10                             [3] 1.750 1400-74 14005-74 140051-74
JERICO    5 & 6 SPEED ALL 1-1/8X26 & 1-3/16X18 1.410 1400-30 14005-30 140051-30 1439
JERICO    5 & 6 SPEED WITH 3.542 FRT BRG 1-3/8X10                             [4] 1.750 1400-75 14005-75 140051-75
 
NOTES: 
[1] ADJUSTING SLEEVE IS INCLUDED WITH EACH ASSEMBLY 
[2] SPACER SLEEVE IS SHOWN FOR ASSEMBLIES WHICH REQUIRE THEM 
[3] 139074 REPLACEMENT ADJUSTING COLLAR IS INCLUDED IN THIS APPLICATION 
[4] 139075 REPLACEMENT ADJUSTING COLLAR IS INCLUDED IN THIS APPLICATION 
[5] MAY REQUIRE TWO SPACER SLEEVES IF BEARING WON'T ADJUST WITH ONE 
[6] USE WITH TREMEC TKO WITH LONG INPUT SHAFT 
[7] SPACER SLEEVE IF NEEDED IS 1429 
[8] SPACER SLEEVE IF NEEDED IS 1439 
[9] TO CONVERT REGULAR LENCO TO ST1200 A DOUBLE MALE ADAPTER PART NO. 139018 IS REQUIRED.
Back to Top

 

REPLACEMENT PARTS FOR BOLT ON & SLIP ON
 
PART NO. DESCRIPTION PART NO. DESCRIPTION
139002 MASTER CYLINDER 3/4" BORE    
139003 FITTING DOUBLE MALE FOR M/C 3/8X24 X AN-4 139050-1 3.200" O.D. BEARING FOR HYD. ASSEMBLIES
    139050-2 3.000" O.D. BEARING FOR HYD. ASSEMBLIES
139011 STATO SEAL 3/8"    
139013 ELBO SWIVEL FITTING ASSY W/ROLL PIN, O'RING    
       
139015 REPAIR KIT (8 O'RINGS) 1ST GENERATION 139055 ROUND FACE BRG FOR FLAT DIAPHRAGMS SML ID
139016 BLEEDER SCREW    
139017 FITTING DOUBLE MALE FOR INLET, AN-4 ON BOTH ENDS. 139115 REPAIR KIT (6 O'RINGS) 2ND GEN. ELBO FITTINGS
139019 SHUTTLE VALVE FOR DRAG RACING    
139020 SOLENOID FOR LINE LAUNCH    
139021 SWITCH 2 STAGE FOR LINE LAUNCE & BRAKES
139022 MASTER CYLINDER VETTE 1989-96 13/16" BORE 139009 STL BRAIDED BLEED LINE 11" LG, ONE END RIGED
139024 SLAVE CYL CAMARO 1993-1997 STEEL 7/8" BORE 139010 STEEL BRAIDED FLEX LINE 11"  AN4 FEMALES
139026 ROLL PIN FITTING MALE TO AN4 MALE STRAIGHT 139100-06 STEEL BRAIDED FLEX LINE 6"    AN4 FEMALES
139027 ROLL PIN FITTING MALE TO AN4 MALE ELBO 139100-13 STEEL BRAIDED FLEX LINE 13"  AN4 FEMALES
139028 ROLL PIN FITTING MALE TO AN3 MALE ELBO 139100-24 STEEL BRAIDED FLEX LINE 24"  AN4 FEMALES
139031 PISTON 1.740"  LONG  #1 FOR 1.590" I.D. BEARING 139100-30 STEEL BRAIDED FLEX LINE 30"  AN4 FEMALES
139032 PISTON 1.940"  LONG  #2  FOR 1.590"I.D. BEARING 139100-36 STEEL BRAIDED FLEX LINE 36"  AN4 FEMALES
139033 PISTON 2.140"  LONG  #3  FOR 1.590"I.D. BEARING 139100-48 STEEL BRAIDED FLEX LINE 48"  AN4 FEMALES
139034 PISTON 2.340"  LONG  #4  FOR 1.590" I.D. BEARING
139035 PISTON 2.540"  LONG  #5  FOR 1.590"I.D. BEARING 139200 QWIK DISCONNECT FITTING ASSY NO LINES
139036 PISTON 2.740"  LONG  #6  FOR 1.590"I.D. BEARING 139201 QWIK DISCON. FITTING FEMALE ONLY NO LINES
139037 PISTON 2.940"  LONG  #7  FOR 1.590"I.D. BEARING 139202 QWIK DISCON. FITTING MALE END ONLY NO LINES
139038 PISTON 3.140"  LONG  #8  FOR 1.590"I.D. BEARING 139203-03 QWIK DISCON. FITTING FEMALE WITH 3" AN4F LINE
139204-03 QWIK DISCON. FITTING MALE WITH 3" AN4F LINE
139031-1 PISTON 1.650"  LONG  #1 FOR 1.900"I.D. BEARING 139203-17 QWIK DISCON. FITTING FEMALE W/17" AN4F LINE
139032-1 PISTON 1.850"  LONG  #2 FOR 1.900"I.D. BEARING 139204-17 QWIK DISCON. FITTING MALE W/17" AN4F LINE
139033-1 PISTON 2.050"  LONG  #3 FOR 1.900"I.D. BEARING 139205 QWIK DISCON. ASSY WITH 3" AN4F LINES
139034-1 PISTON 2.250"  LONG  #4 FOR 1.900"I.D. BEARING 139210 QWIK DISCON. ASSY CAMARO 1998-03
139035-1 PISTON 2.450"  LONG  #5 FOR 1.900"I.D. BEARING 139211 QWIK DISCON. FITTING FEMALE CAMARO 1998-03
139036-1 PISTON 2.650"  LONG  #6 FOR 1.900"I.D. BEARING 139212 QWIK DISCON. FITTING MALE CAMARO 1998-03
139037-1 PISTON 2.850"  LONG  #7 FOR 1.900"I.D. BEARING 139213 QWIK DISCON. FITTING 22.5" MALE LINE ONLY
139038-1 PISTON 3.050"  LONG  #8 FOR 1.900"I.D. BEARING 139216 QWIK DISCON. ASSY VETTE 1997-UP
139217 QWIK DISCON. FITTING FEMALE VETTE 1997-UP
139040 EXPANDER RING 4.680 TO 4.850 139218 QWIK DISCON. FITTING MALE VETTE 1997-UP
139041 EXPANDER RING 4.680 TO 4.910 139222 QWIK DISCON. LINE ASSY VETTE 2005-UP C6
139042 EXPANDER RING 4.807 TO 5.120    
139043 EXPANDER RING 4.680 TO 5.120
REPLACEMENT PARTS FOR SLIP ON ONLY
139044 EXPANDER RING 4.680 TO 4.807  
139045 CHOKE RING TO FIT SAGINAW BEARING 149015 REPAIR KIT 10 O'RINGS) 1ST GENERATION W/BANJO FITTINGS
139046 EXPANDER RING 4.358 TO 4.807 149074 ADJ. COLLAR 3.347" O.D. FRT BRG & 4.000" BLT PATT-4.850 O.D.
139047 EXPANDER RING 4.358 TO 5.125 149075 ADJ. COLLAR 3.542" O.D. FRT BRG & 4.250" BLT PATT-4.850 O.D.
139048 EXPANDER RING 4.180 TO 4.680 139115 REPAIR KIT (6 O'RINGS) 2ND GENERATION W/ELBO FITTINGS
Back to Top